I was thrilled after I saw how it works. The type of coating I used was epoxy. It is the most common one and it is also known to be the best at its cost. You can choose other types of coatings too, but generally they are all the same . Only the quality and the lifetime will differ between the types. Anyway, all of them will protect your concrete, they will make your garage look better and the best is that, they will make it very easy to clean any stains like oil, gas and types of chemicals.
What you should know is that for almost all types of coatings you need to prepare the concrete or else you could have problems, especially for an epoxy coating. The first thing you should do is check for moisture, because it will shorten the life of the coating. There are more ways and also products to dispose of it, if you have this situation. Then, you should check the concrete for cracks. In case of any, you should make sure that the concrete will be properly repaired. If you had any of these problems, you should let the concrete a few days before applying the coating.
In some situations you might need to install two coatings. That means you need to let the primary coating at least four hours before installing the second one. So if you want to finish in one day you should begin early. Another thing, which is very important, is that you shouldn't let anyone to set foot in your garage for a couple of days. The car should also remain out for a while until you are sure that the coating has dried. If you carefully look out for these things then your coating will last a long time!
John Sheppard knows that installing garage floor coating is a step forward for your garage. Learn more about Quickrete garage floor coatings and rubber garage floor coating.


Ask About This Article